Used to obtain rock / concrete sample perfectly machined ( cube, prisms, etc) from irregular rock core pieces. It is supplied complete with a proper vice to hold irregular pieces firmly in place up 100x200mm approximately and longer cores can be machine also include cooling water inlet and transparent cover, conforming to CE requirements, with doors that are locked automatically when the machine is cutting. The machine does trimming while cutting, actions leaving, a smooth flat surface to comply with testing requirement. Cutting operations can be left unattended and the machine stops automatically when the operation is complete. The machine is supplied complete with a diamond Blade and water pump with tank. Technical Specifications     Model Number BS 6000 Input Voltage 380V/50hZ Feed Speed 0.1-15mm/m Spindle Speed 2200RPM Cut-Off Wheel ∅350 x 2.5 x 32mm Cutting Capacity Max ∅100mm Max Table Travel Distance 145mm ( only Y axis ) Input Power 3.3kw Cutting Motor 3kw Dimension 960mm x 855mm x 735mm Table Dimension 330mm x 280mm Net Weight 285kg read more

This apparatus uses for determination of the compacting factor of concretes with low, medium and high workability. Made from painted steel sheet. Composed of two hoppers with trap doors Mounted vertically above a cylindrical mould. Technical Specifications   Model Number BS 4001 Product Standard BS 1881 : 103/45057 Dimension 1300 (H) x 320 (W) x 350 (L) Weight 25kg         The Apparatus Comprises The Following Accessories :-   BS 4001-01 Tamping Rod – 16mm diameter x 600mm long with both end hemispherical BS 4001-02 Scoop – made of galvanized steel BS 4001-03 Metal Tray – 900 x 900 x 80mm height read more

Shrinkage Limit Set consists of a selection of items needed to perform shrinkage limit testing, per ASTM and AASHTO testing standards. ( ASTM D427, AASHTO T92, UNE 10014, NF XP94-060-1) Technical Specifications   Model Name BS 5030 Model Standard ASTM D427, AASHTO T92, UNE 10014, NF XP94-060-1 Weight Approx 2.5 kg Technical Specification   BS 5030-01 Shrinkage Dish 45mm (D)  x 12.7mm (H) Qty 2. BS 5030-02 Crystallising Dish 57mm (D) x 31mm deep BS 5030-03 Shrinkage prong plate. Manufactured from transparent acrylic and fitted with 3 metal prongs BS 5030-04 Evaporating Dish BS 5030-05 Graduated cylinder 25ml BS 5030-06 Spatula BS 5030-07 Plastic carrying case read more

To determine the strength value of rock sample for site and lab. The unit apparatus consists of load frame with maximum load of 50kN mounted together with a hydraulic jack. Maximum specimen size of 100mm (4”) diameter which loaded by two cone shaped points. The unit consist of a load cell and digital indicator where peak load applied are indicated. The Resolution of the digital indicator is 0.01kN and comes with internal battery for portable operation at site. Technical Specifications     Model Number BS 1002 Product Standard ISRM, ASTM D5731, EN1997-2 Dimension 300 (H) x 300 (L) x 450 (W) mm Weight 5.6kg Max Capacity 50kN     The Apparatus Comprises The Following Accessories   Weight BS 1002-01 Set Of Hard Conical Cone 0.6kg read more

Laboratory Vane Apparatus with 4 Springs and 12.7mm Vane; Comes with 38 and 110mm sample holder Stress is applied through the 12.7 x 12.7 mm vane by means of any one of four calibrated springs at a shearing rate of 10° per minute to determine shear strength of specimen. Technical Specifications Model Number BS 7300 Product Standard BS 1377, BS EN , ASTM Dimension 200 (L) x 240 (W) x 560 (H) mm Weight 7.5kg read more

The water level is used to measure water level depth in wells, borehole, standpipe and tanks. BSGS water level is made of sturdy cable reel with meter tape. It is operate with a stand battery with LED indication and ON/OFF switch. The portability of the meter make it easy to carry at site and operate by one person. Technical Specification Model Number BS 9048 Measuring Range 100mm /  1m resolutions Dimension 160mm x 190mm Weight 5kg Tape Length 50 meter Power Supply 9V Lithum Battery read more

The HY-13 by BSGS Scientific is a high-resolution handheld load cell indicator designed to work with all types of load cell and strain gauge based transducer. The HY-13 handheld load cell indicator features a 7-digit LCD display which makes it suitable for any monitoring application from general industrial up to high accuracy reference standards.  Other features include peak capture, display update rates up to 25Hz, zero / tare reading throughout the range, calibration and display backlight. The handheld load cell indicator’s allows for calibration in three different engineering units, i.e. Kilonewtons, kg,tonne or no unit for general purposes.  The handheld load cell digital display is housed in a robust IP65 enclosure and powered by 4x ‘AAA’ batteries that provide up to 300 hours of continuous operation in low power mode with a 350Ω load cell or strain gauge bridge connected.   Technical Specifications     Model HY 13 Sensor input type 4 wire strain gauge type, load cells / pressure sensors / torque sensors etc. Voltage Excitation 4.5 v Measuring range -20mV to 20mV Sensor connection 5 Pin DIN Power AAA 1.5V x4 Display LCD Dimensions 165mm x 80 x 30mm read more

Description Displacement Transducers are used with various testing machines for example soil triaxial, direct shear and consolidation to automate the axial strain reading. BSGS displacement transducer has excellent linearity and resolution. A range of travel and measuring resolutions are available. Please refer the specifications table for guide.   The transducer can be used with the BSGS G-DAQ Data Logger to calibrate and log the reading automatically.Alternatively, the transducer also works with a number of equipment and data logger brands in the market. Technical Specifications   Model Number BS 9015-1 Accuracy 0.05% Linearity 0.25% Transducer Output Resistance, 0-5 VDC In Out Voltage (VDC) 10 Travel Capacity 10mm,  25mm, 50mm, 100mm Cable Length 1 meters     read more